Written by Transporting oversized loads in Alabama requires a thorough understanding of the regulations surrounding Alabama Oversize Permits. We at IRP Trucks are experts at giving out all kinds of trucking oversize permits, which makes sure that your transport operations are legal and run smoothly. Please feel free to call us at 630-847-0241 if you have any questions about the Alabama DOT Permit or need help with the application process.
Discovering Why Alabama Oversize Permits Are Important
In Alabama, you need a oversize permits for any vehicle or load that is bigger than the state’s legal limits. It is very important to get these permits before going to Alabama because they are only good for five days in a row. This not only makes sure that state laws are followed, but it also makes the roads safer for everyone.
Important Rules for Oversize Loads
If you want to properly drive oversize load in Alabama, you need to know the following rules:
Operating Time: Oversize loads can only be moved during daylight hours, which are Monday through Saturday, from half an hour before sunrise to half an hour after dusk. On Sundays and big holidays, you can’t move.
Legal Dimensions:
Length: Up to 57 feet for trailers; 85 feet overall unless the trailer exceeds 57 feet.
Width: Maximum of 8 feet 6 inches (8 feet on lanes less than 12 feet wide).
Height: Maximum of 13 feet 6 inches.
Weight: Up to 80,000 pounds full weight.
Special permits are needed for loads bigger than these, and loads weighing more than 180,000 pounds are called “Super Loads.”
A Step-by-Step Guide to Getting an Alabama Oversize Permit
Getting a Alabama Oversize Permits is a simple process that can be done online or by calling our office. Here’s how to get through the entry process:
1. Visit the Alabama DOT Permit Application System to access the online portal.
2. Login with your details or make an account if this is your first time using the site.
3. Fill out the necessary information about the size of your load and the route you want to take.
4. Send in your application and wait for it to be approved.
Our team at IRP Trucks is here to help you if you have any questions or need help with the application process.
Escort Requirements for Oversized Loads
Depending on the size of your load, you may need security vehicles:
– For lengths over 90 feet, at least one escort is required; two escorts are needed for lengths over 105 feet.
– If the back of your load hangs over more than five feet, you must also have a guard.
The Alabama Blade and Bucket Rule also says that guards must be present when moving tools like bulldozers or excavators that have blades or buckets that stick out past the sides of the trailer.
Rules for Signs, Flags, and Lights
When moving oversize loads, it’s very important to follow the rules for signs and visibility:
– Put up “Oversize Load” signs on the front and back of your vehicle.
Flags should be put on all four sides of your load.
– If the back of your load hangs over more than four feet, make sure it has lights for nighttime travel.
By taking these steps, sight and safety on the road are greatly improved.
Learning What the County Needs for Oversize Permits
In Alabama, all counties need oversize permits for loads that are bigger than what the regulation allows. This rule applies to both main roads and smaller roads. It’s important to check the rules in your particular town because they may be a little different.
Conclusion
It can be hard to figure out Alabama Oversize Permits, but if you work with IRP Trucks, you can make sure you’re following the rules and running your transport business efficiently. Our team is here to help you every step of the way, whether you need help getting a Alabama DOT Permit, have questions about permit limits, or need help with the Alabama Oversize Permit Login.
Call us at 630-847-0241 for more information or to start the process of getting a permit right away. Even though you concentrate on safely moving your oversized loads, let us handle the paperwork.
Written by 
Written by